Search near an address

OK Clear

• Any infraction
• B01: New building occupied without a valid certificate of occupancy
• B02: Altered building occupied without a valid certificate of occupancy
• B03: Occupancy contrary to that allowed by the certificate of occupancy
• B04: Work without a permit
• B05: Work without a permit (expired permit)
• B06: Failure to maintain exterior building wall
• B07: Failure to maintain building
• B08: Fail to provide two means of egress from room/space where required
• B09: Failure to provide required means of egress for every floor
• B10: Exit door: total obstruction
• B11: Exit passageway or corridor: total obstruction
• B12: Exit door: required width decreased by obstruction
• B13: Exit passageway or corridor: required width decreased by obstruction
• B14: Exit door not self-closing
• B15: Exit door swings against the flow of egress
• B16: Use of prohibited door
• B17: Use of illegal hardware
• B18: Failure to use panic hardware where required by law
• B19: Panic hardware in operative
• B1A: No permit for sidewalk shed
• B1B: No permit for fence
• B1D: No permit for footbridge
• B1E: No permit for catch-platform
• B1F: No permit for sidewalk shanty
• B1G: No permit for sidewalk chute
• B1H: Failure to provide contractor's sign
• B1I: DOT permit for street/sidewalk closing not posted
• B1J: Crane/derrick certificate of approval not available for inspection
• B1K: Crane/derrick certificate of operation not available for inspection
• B1L: Crane/derrick certificate of on-site inspection not available for inspection
• B1M: Site safety approved plans not available for inspection
• B1N: Work contrary to approved dept of buildings plans and application
• B1O: Failure to comply with certificate of on-site inspection
• B1P: Supervision or use of hoisting machine without an operator license
• B1Q: Supervision or use of rigging without a master rigger's license
• B1R: Supervision or use of rigging equipment without a special rigger's license
• B1T: No flagperson
• B1U: Failure to use safety belts while working on swinging scaffold
• B1V: Two-point suspension scaffold/ropes not in compliance with building code
• B1W: Multi-point suspension scaffold/ropes not in compliance with building code
• B1X: Use scaffold with fiber ropes when upper block greater than 100 feet above platform
• B1Y: Use of rigging equipment without proper 'danger' signs
• B1Z: Fail to provide toe board on two-point/multi-point suspension scaffold
• B20: Exit lighting defective /fails to meet building code standards
• B21: Exit sign defective / fails to meet building code standards
• B22: Directional sign defective/fails to meet building code standards
• B23: Failure to provide stair signs in an office building
• B24: Failure to provide elevator signs in office buildings
• B25: Work does not conform to approved plans
• B26: Fence exceeds permitted height
• B27: Failure to provide approved plans at premises at time of inspection
• B28: Failure to post sign with occupant loads
• B29: Failure to provide/maintain fire stopping where required
• B2A: Fail to provide guard rails on two-point/multi-point suspension scaffold
• B2B: Fail to provide center iron on two-point/multi-point suspension scaffold
• B2C: Improper size rope used for hoisting
• B2D: Use of hoisting cable less than 1/2 inch in diameter
• B2E: Operation of crane/derrick or equipment in an unsafe manner
• B2F: Failure to close sidewalk before lifting over the sidewalk
• B2H: Operation of defective crane/derrick or hoisting equipment
• B2I: Personnel riding on material hoist
• B2J: No toe boards
• B2K: No guard rails
• B2L: Failure to provide protection at sides of excavation
• B2M: Failure to provide warning sign
• B2N: Failure to provide warning lights
• B2O: Failure to provide handrails on stairwell
• B2P: Unsafe storage of materials at edge of buildings
• B2Q: Opening/holes not covered
• B2R: Failure to provide escape hatch
• B2S: Failure to provide catch platform
• B2T: Fail to safeguard public / property affected by construction operations
• B2U: Failure to perform adequate housekeeping
• B2V: Fail to protect roofs, roof outlets or skylights of adjoining property
• B2W: No sidewalk shed
• B2X: Sidewalk shed does not meet building code specifications
• B2Y: Sidewalk shed not adequately maintained
• B2Z: Sidewalk shed overloaded
• B30: No fireproof enclosure for boiler
• B31: Fail to provide 8-foot-high fence where required during excavation
• B32: Failure to provide protection at sides of excavation
• B33: Fail to protect roofs/outlets/skylights of adjoining property during construction
• B34: Failure to protect adjoining structures during excavation
• B35: Fail to provide adequate protection for sidewalks/walkways during construction
• B36: Fail to safely/properly remove materials/debris from construction
• B37: Fail to properly store combustible material or other materials
• B38: Fail to carry out demolition operations in a safe and proper manner
• B39: Fail to adequately grade, drain, or otherwise protect site after demolition
• B3A: Sidewalk shed unsafe
• B3B: No job site fence
• B3C: Job site fence defective
• B3D: Failure to protect openings in job-site fence
• B3E: No site safety log per regulations
• B3F: Failure to comply with site safety program/plan per regulations
• B3G: Failure to have site safety manager present as required
• B3H: No elevator in readiness
• B3I: No standpipe system
• B3J: Siamese connection defective does not meet building code standards
• B3K: Miscellaneous violations of site safety
• B3L: Fail to notify the department prior to the commencement of demolition
• B3M: Fail to provide adequate protect for sidewlks/walkways during construction
• B3N: Fail to safety/properly remove material debris from demolition
• B3O: Fail to properly store combustible material/equipment during demolition
• B3P: Fail to carry out demolition operation in a safe and proper manner
• B3Q: Failure to adequately grade, drain/protect site after demolition
• B3R: Failure to do adequate housekeeping during demolition operations
• B3S: No elevator readiness during demolition operations
• B3T: Handrails missing on stairways during demolition
• B3U: Openings/holes not covered during demolition
• B3V: Safety zone not provided during mechanical demolition
• B3W: Fences not provided for safety zone during mechanical demolition
• B3X: No permit from fire department for welding/cutting operations during construction
• B3Y: Unsafe storage of materials less than five feet from building
• B3Z: Unsafe storage of materials less than two feet from building edge
• B40: Failure to file 10F prior to start of controlled work
• B41: Failure to file 10E upon completion of controlled work
• B42: Failure to obtain a permit for temporary construction
• B43: Failure to post contractor's sign
• B44: Failure to post Department of Transportation permit for street/sidewalk closing
• B45: No toe boards
• B46: No guard rails
• B47: Fail to safeguard public / property affected by construction operations
• B48: Failure to maintain adequate housekeeping
• B49: No sidewalk shed
• B4A: Failure to maintain boiler
• B4B: Failure to maintain boiler (A) (hazardous)
• B4C: Failure to maintain boiler (B)
• B4M: Waste dump/debris box/skip box not maint in accord with department rules
• B4N: Insufficient containers provided for the storage of garbage
• B4O: Horizontal safety netting not provided
• B4P: Vertical safety netting not provided
• B4Q: Horizontal safety netting not provided during demolition
• B4R: Debris not removed from safety netting
• B4T: Wedges used in reshores within ten feet of facade
• B4U: Safety netting not labeled
• B4V: No documentation from manufacturer on job site for safety
• B4W: Safety netting damaged and/or broken
• B4Y: Failure to notify department of accident/complaint to public or property
• B50: Sidewalk shed does not meet building code specifications
• B51: Sidewalk shed not adequately maintained
• B52: Sidewalk shed overloaded
• B53: Sidewalk shed unsafe
• B54: Illegal use in residential district
• B55: Illegal use in commercial district
• B56: Illegal use in a manufacturing district
• B57: Violation of parking regulations in a residential district
• B58: Violation of parking regulations in a commercial district
• B59: Violation of parking regulations in a manufacturing district
• B5C: Miscellaneous construction violations
• B5D: Demolition work without required demolition permits (non hazardous)
• B5E: Failure to comply with safety requirements during building operations
• B5F: Failure to comply with natural land features, planting
• B5U: Miscellaneous construction violations (hazardous)
• B5X: Undefined infraction code
• B5X: Undefined infraction code
• B60: Fail to comply with conditions/ restrictions applicable to variance
• B61: Miscellaneous violations of the zoning resolution
• B62: Operation of a place of assembly without a current permit
• B63: Failure to post approved capacity sign
• B64: Approved place of assembly plans not available for inspection
• B65: Place of assembly contrary to approved plan
• B66: Operation of place of assembly contrary to certificate of occupancy when current certificate of occupancy allows operation
• B67: Operation of place of assembly contrary to certificate of occupancy when current certificate of occupancy does not allow operation
• B68: Failure to provide at least two means of egress
• B69: Required means of egress obstructed
• B6A: Failure to maintain exterior building wall (hazardous)
• B6B: Violation of discretionary zoning conditions on privately owned public space
• B6C: Miscellaneous violation of 'as of right' zoning condition on privately owned public space
• B70: Use of prohibited door in place of assembly
• B71: Use of illegal hardware in place of assembly
• B72: Failure to provide panic hardware in place of assembly
• B73: Panic hardware in place of assembly inoperative
• B74: Place of assembly exit sign does not meet building code standards
• B75: Place of assembly directional sign does not meet building code standards
• B76: Place of assembly exit lghting does not meet building code standards
• B77: Place of assembly exit door not self-closing
• B78: Place of assembly exit door swings against the flow of egress
• B79: Place of assembly exit door of insufficient size
• B7A: Failure to maintain building (hazardous)
• B7B: Failure to report an elevator accident
• B80: No emergency lighting
• B81: Emergency lighting is inoperative or defective
• B82: Emergency lighting is inadequate
• B83: Failure to obtain a certificate of electrical inspection for emergency
• B84: Failure to amend plans to show location of emergency light
• B85: No fire alarm system
• B86: No approval certificate for fire alarm system
• B87: Failure to clean range grease filters
• B88: Failure to maintain record of duct and filter cleaning
• B89: Failure to maintain place of assembly
• B8A: Fail to file 'report of compliance with LL16/84'
• B8B: Signs at elevator landings missing or defective
• B8C: Floor numbering signs missing and/or defective
• B8D: Stair/elevator identification signs missing or defective
• B8F: Work without a permit (elevator)
• B8H: Failure to maintain elevator (hazardous)
• B8J: Failure to file annual boiler report with this department
• B8K: Failure to provide/inadequate fire protection for escalator
• B8M: Failure to provide / inadequate emergency power exit lights
• B8N: Perform work required to be performed by licensed master plumber
• B8O: Failure to provide / inadequate emergency power / directional signs
• B8P: Failure to file a report of private elevator inspection
• B8R: Failure to provide/inadequate smoke control
• B8S: Failure to provide / inadequate fire command / communication
• B8X: Operation of an elevator without an equipment use permit
• B90: No certificate for fireproof drapes and/or curtains
• B91: Miscellaneous building code violations
• B92: Operation of crane/derrick without certificate of approval/certificate of operation
• B93: Operation of crane/derrick without certificate on site inspection
• B94: Operation of boom truck without certificate of operation
• B95: No permit for elevator in readiness
• B96: No permit for material hoist
• B97: No permit for personnel hoist
• B98: No permit for new building
• B99: Work without a permit; expired permit
• B9A: Fail to comply with Commisioner's order to file Certificate of Correction with Department of Buildings
• B9B: Filing a false certificate, form, affidavit/statement of correct
• BA0: Failure to maintain plumbing and/or appurtenances (non-hazardous)
• BA1: Failure to maintain plumbing and/or appurtenances (hazardous)
• BA2: Plumbing work without a permit
• BA3: Approved plans not available at premises at time of inspection
• BA4: Work does not conform to approved plans (plumbing)
• BA5: Fuel oil burning equipment installed by other than licensed installer
• BA6: Heating combust/cooking equipment installed with inadequate clearances
• BA7: Inadequate air supply in boiler room
• BA8: Suspended unit heater not adequately supported
• BB0: Piping and/or equipment installed improperly
• BB2: Gas vent reduced or undersized
• BB3: Gas vent installed at illegal height or location
• BB4: Gas vent connector backpatched
• BB5: No potable water in habitable building
• BB7: Building water service / house sewer not connected to public water main
• BB8: Insufficient plumbing fixtures as required by RS-16
• BB9: Plumbing fixture not properly trapped and/or vented
• BBB: Advertising to perform work requiring Department of Buildings license without being licensed
• BC0: Piping installed in elevator/counterweight hoistway
• BC1: Use/installation of plumbing materials/equipment do not comply with RS-16
• BC2: Gas supplied to building with out inspection/certification by this department
• BC3: Potable water piping cross connected to non-potable water
• BC4: Water supply system not in accordance with RS-16
• BC5: Drainage system not in accordance with RS-16
• BC8: Failure to have new or altered plumbing system tested
• BC9: Failure to uncover plumbing system for inspection and/or test
• BD2: Siamese connection(s) not painted in approved colors and/or labeled
• BD3: Fail to provide drip valves between siamese connection/ check valve
• BD4: Required standpipe system not installed
• BD6: Standpipe system in building under erection/demolition not in accordance with this section
• BE0: Insufficient number of siamese connections
• BE2: Hose outlet valve(s) not provided/do(es) not meet building code standards
• BE3: Roof manifold not provided / does not meet building code standard
• BE5: Hose provided is not of proper type size and/or quality
• BE8: Insufficient water supply to standpipe
• BF0: Failure to install required control valve
• BF4: Sprinkler installation not in accordance with RS17-2
• BF5: No sprinkler alarm in accordance with RS17
• BF6: Failure to provide required siamese connection(s)
• BF7: Insufficient sources of water supply for sprinkler system
• BF8: Failure to provide sprinkler booster pump where required
• BF9: Sprinkler system not properly protected from freezing
• BG0: Sprinkler system not properly tested
• BG1: Operation of a place of assembly without a current permit
• BG2: Failure to provide a system of automatic sprinklers where required
• BG3: Exit sign defective / fails to meet building code standards
• BG4: Directional sign defective / fails to meet building code standards
• BG5: Failure to file amended report indicating correction of unsafe condition
• BG6: Signs at elevator landings missing or defective
• BG7: Floor numbering signs missing and/or defective
• BG8: Stair and/or elevator identification signs missing or defective
• BG9: Failure to provide / inadequate emergency power exit lights
• BH0: Failure to provide / inadequate emergency power exit / directional
• BH3: Work without a permit (hazardous)
• BH4: Work does not conform to approved plans (hazardous)
• BH5: Signs required by NYC admin code not made of durable material
• BH6: Signs required by NYC admin code not made of durable material
• BH7: Occupancy contrary to certificate of occupancy or building department records
• BH8: Occupancy contrary to certificate of occupancy or building department records (HPD)
• BH9: Fail to provide two means of egress from room/space where required
• BI2: Failure to submit a fifth round technical report as required by Local Law 11
• BI5: Plumbing work without permit
• BI6: Plumbing work without permit
• BI8: No permit for fence
• BIA: File a false certificate, form, affidavit or statement
• BIB: Failure to submit a third round technical report as required
• BIG: Work does not conform to approved plans
• BIH: Occupancy contrary to that allowed by certificate of occupancy or Department of Building records
• BIO: Undefined infraction code
• BIO: Undefined infraction code
• BJ1: Failure to post permit for work at premises
• BJ2: Miscellaneous plumbing violation
• BJ3: Failure to install acceptable two-way voice communication system
• BJ5: Dwelling illegally converted from 1 to 2/3 family or, 2 to 3 families
• BJ6: Failure to provide / inadequate emergency power exit lights
• BJ7: Failure to provide / inadequate emergency power exit/direct
• BJ8: Exit sign defective / fails to meet building code standards
• BJ9: Directional sign defective / fails to meet building code standards
• BK0: Signs at elevator landings missing or defective
• BK1: Floor numbering signs missing or defective
• BK2: Stair and/or elevator identification signs missing or defective
• BL0: Sidewalk shed does not meet building code specifications
• BL1: Work without a permit; expired permit
• BL2: Failure to post permit for work at premises
• BL3: Failure to provide contractor's sign
• BL4: DOT permit for street/sidewalk closing not posted
• BL5: Work without a permit (hazardous)
• BL6: No watchperson
• BL7: No flagperson
• BL8: Failure to safeguard public / property affected by demolition operations
• BL9: No sidewalk shed
• BM0: Failure to do adequate housekeeping during demolition operation
• BM1: Sidewalk shed not adequately maintained
• BM3: Miscellaneous HPD demolition violation
• BM4: Failure to perform adequate housekeeping
• BM5: Failure to notify the department prior to the commencement of d
• BM6: Failure to safely / properly remove material debris from
• BM7: Failure to properly store combustible material during dem
• BM8: Failure to carry out demo operations in a safe and proper
• BM9: Failure to adequately grade, drain, or protect site after
• BN2: Safety zone not provided during mechanical demolition
• BN3: Fences not provided for safety zone during mechanical dem
• BN4: Failure to provide / inadequate emergency power exit lights
• BN5: Exit/directional sign(s) defective/fail(s) to meet building
• BN6: Failure to provide / inadequate emergency power exit signs
• BN7: Signs at elevator landings missing or defective
• BN8: Floor numbering signs missing or defective
• BN9: Stair and/or elevator identification signs missing or defective
• BP0: Occupancy contrary to that allowed by certificate of occupancy (hazardous)
• BP1: Signs required by NYC admin code not made of durable material
• BP2: Failure to remove locks on elevator and hoistway doors
• BP4: Fail to file report certificate of installation of required fire protect
• BP5: Work without a permit
• BP6: Work without a permit (hazardous)
• BP7: Failure to maintain elevator
• BP8: Failure to maintain elevator (hazardous)
• BP9: Occupancy contrary to that allowed by certificate of occupancy
• BQ0: Exit lighting defective/fails to meet building code standards
• BQ1: Failure to immediately notify DOB of accident involving hoisting machinery
• BQ2: Work without permit
• BQ3: Occupancy contrary to allowed by certificate of occupancy or Department of Buildings records
• BQ4: Directional sign defective / fails to meet building code standards
• BQ5: Residence altered for occupancy by more than legally approved
• BQ6: Residence altered for occupancy by more than legally approved
• BQ7: Additional daily penalty for continued violation of 27-11
• BQ8: Additional daily penalty for continued violation of 27-11
• BQ9: Boiler installed, altered, repaired or used without a permit
• BQA: Undefined infraction code
• BR0: Signs at elevator landings missing and/or defective
• BR1: Floor numbering signs missing and/or defective
• BR2: Stair and/or elevator identification signs missing and/or
• BR3: Sign requirements not made of durable materials
• BR5: Failure to maintain exterior building wall - local law 11/98
• BR8: People with physical disabilities: public space not accessible
• BS0: People w/ physical disabilities: inadequate access: public toilet rooms
• BS7: People with physical disabilities: insufficient usable park
• BS9: People with physical disabilities: failure to provide/inadequate access
• BT2: People with physical disabilities: primary entrance/ramps inaccessible
• BT4: Failure to file a fourth round tech report as required by Local Law
• BT6: Directional sign defective/fails to meet building code standards
• BU0: Licensed Rigger Failed to supervise rigger work.
• BU0: Licensed Rigger Failed to supervise rigger work.
• BU1: Licensed Rigger designated an unqualified foreman.
• BU1: Licensed Rigger designated an unqualified foreman.
• BU2: Licensed Rigger failed to ensure scaffold worker met minimum req.
• BU2: Licensed Rigger failed to ensure scaffold worker met minimum req.
• BU3: Licensed sign hanger failed to supervise sign hanging work.
• BU4: Licensed sign hanger designed an unqualified foreman.
• BU4: Licensed sign hanger designed an unqualified foreman.
• BV1: Failure to comply with order by the Department of Buildings
• BV2: Work required by a licensed master plumber without master plumber
• BV3: Failure to file 10F/TR1 prior to start of controlled work
• BV4: Failure to file 10E/TR1 upon completion of work
• C1A: Outdoor ad company: sign on display structure without a permit
• C1B: Outdoor ad company: sign is contrary to approved plans
• C1C: Outdoor ad company: light fixture or awning has unlawful projec
• C1D: Outdoor ad company: sign has unlawful projection
• C1E: Outdoor ad company: sign obstructs egress or required light or
• C1Q: Miscellaneous sign violation by outdoor ad company
• C1R: Miscellaneous sign violation by outdoor ad company
• C2A: Outdoor ad company has impermissible illuminated or flashing sign in district